GRASS VALLEY Encore, Configuration Manual

Page: 59 / 426

Encore — Configuration Manual 59
Initial Setup Using Default Database
Install Encore Software (including NetConfig) on PC
Note Detailed instructions for updating the software of an existing Encore system
are presented in the separate
E n co r e Relea s e Note s . The procedure below is
intended for first time Encore installations.
1. Quit all programs on the configuration PC and disable any virus
protection programs or firewalls. You will need administrator
privileges and any appropriate passwords for your PC.
2.
Insert the Encore System Software CD into the PC. If the Installation
Program doesn’t start up automatically, double-click
Setup.exe
on the
CD.
3. Follow all the instructions displayed on the screens that appear,
choosing the default settings.
4. When the Select Encore Components Screen appears, the Default
Database box may not be selected (as shown on the left of
Figure 31 ).
Figure 31. Select Encore Components Screen
5. Because you are installing a completely new Encore system, select the
Factory Default OMN Database checkboxes, and make sure the Encore Utilities
is also selected (which installs NetConfig). You can safely check all the
other boxes on this screen. To save disk space on your PC, if you know
the system will not control a specific matrix type (Concerto, 7500,
Trinix) you can uncheck the boxes for unused hardware.
CAUTION If you are working on an existing Encore system, do NOT install the default
database. This overwrites your existing configuration. To update Encore soft-
ware follow the procedures in the separate
E n co r e Relea s e Note s .