GRASS VALLEY Concerto, Instruction Manual

Page: 130 / 174

130 Concerto — Instruction Manual
Section 3 — Control System Configuration
Native Protocol Configuration
Note The Concerto Native Protocol feature is intended for third party developers.
Existing customers should use Standard Control on their Encore systems.
Concerto software versions 1.7.5 and newer support Native Protocol (NP)
Index commands. Concerto web pages have settings for local configuration
if NP is used. A Concerto matrix can now operate under
Standard Control
,
operate only with NP (
Standalone
control option), or both standard and NP
control (
Allow Native Protocol Control
). These settings are selected with the
Control Options
located on the Concerto System Configuration web page
( Figure 76 ).
Figure 76. Concerto Standalone Control Setting.
If the
Local Control
setting is selected and saved, the Concerto Local Config-
uration web page is available that allows local matrix configuration
(
Figure 77 ).