GRASS VALLEY Concerto, Instruction Manual

Page: 120 / 174

120 Concerto — Instruction Manual
Section 3 — Control System Configuration
Figure 72. AES Input Inverts
Invert options assign the invert (opposite logic state) of the signal to an
Input using the settings in
Table 44 .
2. After assigning the Input attributes, click OK to finalize your settings.
Table 44. AES Invert Options
Attribute Definition
0 None Signal is not changed.
1 Channel A Channel A’s audio is inverted.
2 Channel B Channel B’s audio is inverted.
3 Both A & B Channel A and Channel B’s audio is inverted.
Async Asynchronous signals are routed in 7500
matrices. Not supported by Concerto.
CHA
CHA
CHB CHB
None
Left Channel
Right Channel
Invert Channel A
CHA
CHA
CHB CHB Right Channel
Invert Channels A & B
CHA
CHA
CHB CHB
Invert Channel B
CHA
CHA
CHB CHB
Left Channel
7103_01_02_r0