File name
Software compatible with 3.x K2 SAN
SNFS_nonK2_x64_
x.x.x.xxx
.cab
(Use
version compatible with your K2 software)
SNFS for 64 bit systems
•
If your devices access storage on a K2 software version 7.x K2 SAN, add software
package installation files as follows:
File name
Software compatible with 7.x K2 SAN
GenericISCI_x86_7.2.x.cab
Generic iSCSI client for 32 bit systems
GenericISCI_x64_7.2.x.cab
Generic iSCSI client for 64 bit systems
GVG_MLib_7.2.x.cab
GVG MLib
SNFS_nonK2_x86_
x.x.x.xxx
.cab
(Use
version compatible with your K2 software)
SNFS for 32 bit systems
SNFS_nonK2_x64_
x.x.x.xxx
.cab
(Use
version compatible with your K2 software)
SNFS for 64 bit systems
You can add files for both 32 bit and 64 bit systems because when SiteConfig deploys
software it automatically deploys the 32 bit or 64 bit software appropriate for the target
device. SNFS is no longer bundled with the Generic iSCSI cab file.
1. In the
Software Deployment | Deployment Groups
tree view, select a deployment
group.
2. Click the
Add
button.
The Add Package(s) dialog box opens.
3. Do one of the following to select the software package:
•
Select from the list of packages then click
OK
.
•
Click
Browse
, browse to and select the package, then click
Open
.
4. If one or more EULAs are displayed, accept them to proceed. If you do not accept
a EULA, the associated software is not assigned to the deployment group.
SiteConfig adds the package to the deployment group.
The package appears in the Managed Packages list for the selected deployment group.
SiteConfig creates new software deployment tasks for the package and displays them
in the Tasks list view.
Setting deployment options
Pre-requisites for this procedure are as follows:
•
A software package has been assigned to the deployment group and applicable
deployment tasks are now displayed in the Tasks area.
24
Aurora Ingest Version 7.1.0 Release Notes and Upgrade Instructions
18 October 2010
Upgrading Aurora Ingest systems
