Chapter 2 - Basic Operations
21
4. Input time code
00:00:03:22 ................For PAL/NTSC NDF (Non Drop Frame)
* A colon is used between seconds and frames as a delimiter.
00:00:03;22 ................For NTSC DF (Drop Frame)
* A semicolon is used between seconds and frames as a delimiter.
--:--:--:-- ......................No DV signal input
* Free-run time code is used during built-in color bar output or when time code is
not input.
Main Screen 2
This screen shows the information on the current settings.
GENLOCK:enable
REMOTE:enable NTSC
1. External synchronization enabled/disabled
Displays the current setting of the external synchronization.
2. 9-pin remote enabled/disabled
Displays the current setting of the 9-pin remote.
3. Video standard
Displays the current video standard.
1. External synchronization enabled/disabled
disable ........................External synchronization function is disabled.
enable .........................External synchronization function is enabled.
advanced ....................External synchronization function in the “perfect sync mode” is
enabled.
2. 9-pin remote enabled/disabled
disable ........................9-pin remote control function is disabled.
enable .........................9-pin remote control function is enabled.
3.Video standard
NTSC ..........................ADVC700 operates in NTSC mode.
PAL .............................ADVC700 operates in PAL mode.
SECAM .......................ADVC700 operates in SECAM mode.
Summary of Contents for ADVC700 -
Page 1: ...User Manual ...
Page 7: ...Table of Contents Table of Contents ...
Page 50: ...Chapter 2 Basic Operations 50 ...
