GRASS VALLEY ACAPPELLA -, Instruction Manual

Page: 68 / 128

68 Acappella — Instruction Manual
Section 4 — Software and Configuration
The following two settings come from the factory with default settings.
User adjustments can be made to these settings. The default settings can be
restored on the
Router Factory Defaults Page page.
Local Panel Dim Button Intensity:
This setting is used to adjust the button brightness at Low Tally.
Serial Control Port Baud Rate:, Parity:, Data Bits:, and Stop Bits:
These settings are used for serial interface settings for the 9 pin D connector
on the router. These settings are configured according to the requirements
of the controlling serial device.
The following two controls are used to change the settings:
Do reset
When checked, the router will be reset when the
Save New Settings
button is
clicked.
Save New Settings
This button saves changes to the
Router Name
,
Location
,
Asset Tag
, and
Local
Panel Dim Button Intensity
fields.
To view changes after clicking the
Save New Settings
button, click on the
Refresh
button.