GRASS VALLEY 8990ARC -, Instruction Manual

Page: 9 / 56

8990ARC Instruction Manual 9
Installation
Figure 1. 8900 Series Frame
8900 modules are interchangeable within the module cells. There are 10
BNC connectors in each cell’s I/O group. The functional assignment of
each connector in a group is determined by the module that is placed in
that cell. The maximum number of modules an 8900 frame can accept is ten.
Figure 2 illustrates the rear connector plate for an 8900 Series frame.
Figure 2. 8900 Series Frame Rear Connectors
To install a module in the frame:
1.
Insert the module, connector end first, with the component side of the
module facing to the right and the ejector tab to the top.
2.
Verify that the module connector seats properly against the backplane.
3. Press the ejector tab in to seat the module in place.
Frame Controller or
8900NET Network
Interface Module
Any Gecko/8900 Module
Power
Supplies
8036_04
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
IN
1
J2
J4
J6
J8
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
IN
3
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
IN
5
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
IN
2
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
IN
7
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
IN
9
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
IN
4
J2
J4
J6
J8
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
IN
6
J2
J4
J6
J8
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
IN
8
J2
J4
J6
J8
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
IN
10
O
U
T
O
U
T
O
U
T
O
U
T
O
U
T
O
U
T
O
U
T
O
U
T
O
U
T
O
U
T
8036-03