10
8960DEC Instruction Manual
Installation
Cabling
Note
At the back of every hardcover manual are overlay cards that can be placed
over the rear connector BNCs to identify the specific 8960DEC connector
functions.
Loop-through Input
Connect an input source to one of the loop-through input connectors, J9 or
J10 (see
). The 8960DEC input will accept either NTSC or PAL com-
ponent analog video. Terminate the unused connector into 75
Ω
if the
signal is not looped to other equipment.
Figure 3. 8960 Input/Output Connectors
Outputs
The 8960DEC has four serial digital video outputs—J1 through J4. J5 is an
AES Audio Delay RS-232 data output conforming to 118AS documentation.
Reference Inputs
Separate input BNCs are provided for either 525-line (J8) or 625-line (J7)
black burst reference signals. The reference inputs are functional only when
the 8900FSS Frame Sync submodule (option) is present. When the sub-
module is present the inputs provide internal 75
Ω
termination.
J2
J4
J6
J8
J1
J9 J10
IN
Four Component
4:2:2 Outputs
X
O
U
T
J3
J5
J7
J2
J4
J6
J8
0543_02
Loopthrough
Input
625 Reference
Input
525 Reference
Input
Not Used
Audio Delay
