8945EDA/-D — Instruction Manual
41
Configuration Summary Table
provides a complete summary of the module functions and a com-
parison of the functionality available with each control type along with the
ranges and default values for each parameter on each control.
Table 7. Summary of Configuration Functions
Function
Type
Default
Range/Choices
Resolution
Web Page/
Function Name
Local Onboard
Control
Newton
Control
Panel
Config Mode
LCL&REM
LCL or LCL&REM
N/A
Function Switch S2
Pin 1:
0 (left): LOCAL
1 (right): LCL&REM
N/A
Assign Input Coax In 1 J9
to BNC outputs
Dual Mode = DA1
(Outputs
J1, J3, J5, J7)
Dual Mode: DA1
(Outputs J1, J3, J5, J7)
Single Mode:
DA1 and DA2
(Outputs J1, J2, J3, J4,
J5, J6, J7, J8)
Settings
Routing Mode DA1
Coax In 2 J9
Dual: select DA1
Single: select DA1 and DA2
Function Switch S1
Dual DA1
Pin 1: 0 (left)
Pin 2: 0 (left)
Single DA1 and DA2
Pin 1: 1 (right)
Pin 2: 0 (left)
Rout Mod 1
Assign Input Coax In 2
J10 to BNC outputs
Dual Mode = DA2
(Outputs
J2, J4, J6, J8)
Dual Mode: DA2
(Outputs J2, J4, J6, J8)
Single Mode:
DA1 and DA2
(Outputs J1, J2, J3, J4,
J5, J6, J7, J8)
Settings
Routing Mode DA2
Coax In 2 J10
Dual: select DA2
Single: select DA1 and DA2
Function Switch S1
Dual DA2
Pin 1: 1(left)
Pin 2: 1 (left)
Single DA1 and DA2
Pin 1: 0 (left)
Pin 2: 1 (right)
Rout Mod 2
(8945EDA-D only)
Coax In 1 J9 Signal name
for SNMP reporting
Coax In 1 J9
12 character limit
Settings
Coax In 1 J9 Signal Name
Enter signal name
N/A
N/A
(8945EDA-D only)
Coax In 2 J10 Signal
name for SNMP reporting
Coax In 2 J10
12 character limit
Settings
Coax In 2 J10 Signal Name
Enter signal name
N/A
N/A
Input reporting for DA1
Enable
Enable or Disable
Settings
Input Reporting
Set for DA1
N/A
Input Report 1
(8945EDA-D only)
Input reporting for DA2
Enable
Enable or Disable
Settings
Input Reporting
Set for DA2
N/A
Input Report 2
Equalizer mode for DA1
Active
Active or Bypass
Settings
Equalizer Mode
Set for DA1
Function Switch S1
Pin 3:
0 (left): Bypass
1 (right): Active
Equal 1
(8945EDA-D only)
Equalizer mode for DA2
Active
Active or Bypass
Settings
Equalizer Mode
Set for DA2
Function Switch S1
Pin 3:
0 (left): Bypass
1 (right): Active
Equal 2
Signal format for DA1
SD/ASI
SD/ASI or HD
Settings
Signal Format for DA1
SD/ASI or HD button
Function Switch S1
Output Mode DA1/DA2
Pin 8:
0 (left): SD/ASI
1 (right): HD
Both DAs are the same
SgnFormat 1
(8945EDA-D only)
Signal format for DA2
SD/ASI
SD/ASI or HD
Settings
Signal Format for DA2
SD/ASI or HD button
SgnFormat 2
