8943FC — Instruction Manual
47
Configuration and Monitoring
I/O Config Web Page
Use
this
link
Use the I/O Config web page (
) for the 8943FC-R rear module for
rear module configuration and signal status reporting.
All of the input and output connectors on the corresponding 8943FC-R rear
module are illustrated on the I/O Config web page. The inputs can be con-
figured with the following controls:
•
Signal Names
– type of the desired input name (up to 12 characters) into
the corresponding boxes for each input. The status of each input is indi-
cated by the color of the display. The color legend is under the table.
Note
The status color yellow can also indicate that the input is invalid.
•
Reporting Enabled
– the status reporting of the input can be enabled or dis-
abled at the module level by selecting or deselecting the corresponding
checkbox in the
Reporting Enabled
column for each input.
Figure 32. I/O Config Web Page – 8943FC-R Rear
