10
2020ADC — Instruction Manual
Installation
Installation
Installation of the 2020ADC module is a process of:
•
Placing the passive rear module in a rear frame slot,
•
Placing the media module in the corresponding front slot, and
•
Cabling and terminating signal ports.
The 2020ADC module can be plugged in and removed from a 2000 Series
frame with power on. When power is applied to the module, LED indica-
tors reflect the initialization process (see
).
Module Placement in the 2000 Frame
There are twelve slot locations in both the front and rear of a 3RU frame to
accommodate 2000 Series modules. The 2020ADC consists of a two module
set with a front media module and a passive rear module that can be
plugged into any of the 12 frame slots. Each 2020ADC front media module
plugs into the front of the 2000 frame mid-plane. The passive rear module
plugs into the corresponding rear slot to provide the input and output
interface connectors.
To install a 2020ADC module set in the frame:
1.
Locate a vacant slot in the rear of the 3 RU frame (
).
Figure 1. 3 RU Frame, Rear View
Mid-frame motherboard
with power and
communication buses
Rear media module slots 1 – 6
Rear media module slots 7 – 12
8025-04r1
