4-46
CHAPTER 4 Settings and Measurement
(6)-7
Add checksum to file
The checksum is used to check the consistency of the data file.
If the contents of the file are changed, checksum confirmation does not match the checksum, so you can
see that the file was changed.
The checksum function adds a checksum to the data file.
Selection item
Description
Off
The checksum is added to the data file.
On
The checksum is not added to the data file.
* The checksum is also added to the backup file, ring / relay file, data save file.
Use the GL-Connection software on the PC to check the checksum.
● The checksum is available only for GBD format.
● If the captured file converted and saved using a device other than this GLT400 (GL-Connection), the
checksums does not match
(6)-8 Date/Time
Makes settings related to the GLT400 clock.
The internal clock (date and time) of the GLT400 can be set.
(6)-9 Language setting
Set the desired language from 9 languages (Japanese, English (US), English (UK), French, German,
Chinese, Korean, Russian and Spanish).
The language used in CSV capturing file and Web server function is changed.
(6)-10 Initializes operation settings
Initializes the operation settings. After initialization, the setting conditions returns to the factory default
settings.
For the initialization information, refer to “3.5 Description of Operation Mode (7) Initialize and read settings”.
(6)-11 Initializes network settings
Initializes the network settings. After initialization, the setting conditions returns to the factory default
settings.
For the initialization information, refer to “3.5 Description of Operation Mode (7) Initialize and read settings”.
(6)-12 Restart the GLT400
The GLT400 is forcibly restarted. Capturing must be stopped in advance. When connecting to the network,
the network is also disconnected. Reconnect after restarting the GLT400.
(6)-13 Information
Displays system information.
