3-8
CHAPTER 3 Settings and Measurement
10 . AC/battery status indicator
: Running on AC or DC power supply.
: Running on battery. The remaining battery power is 100 to 91%.
: Running on battery. The remaining battery power is 90 to 61%.
: Running on battery. The remaining battery power is 60 to 31%.
: Running on battery. The remaining battery power is 30 to 11%.
: Running on battery. The remaining battery power is 10% or below.
•
Data capture automatically stops when the remaining battery power drops to 10% or below during .
Auto Save will be performed even when Auto Save is not set while data is being captured to the internal
RAM .
•
The power is automatically turned off when the remaining battery power is 0% .
•
Use the remaining battery display only as a reference .
This indicator does not guarantee the exact operating time of a battery .
11 . Digital display of Y-T screen
Displays the input value of each channel and span. Use the [SPAN/TRACE/POSITION] keys to switch the
display.
Use the keys to select the channel you want to activate (enlarged display).
The waveform of the active channel is displayed at the top.
: Displays the input value.
: The span of the active channel can be changed using the keys.
: The position of the active channel can be changed using the keys.
: The ON or OFF of the active channel display can be changed using the keys.
For details, refer to “3.2 Key Operation” - “(2) SPAN/TRACE/POSITION”.
As described below, the CH indicating the calculation mark is the channel which calculation between the
CHs is enabled (On).
Calculation mark
12 . Quick settings
The settings of the sampling interval and the division of waveform display can be changed. Use the keys
to activate the Quick setting and the left/right keys to change values.
* The "SAMPLE" item cannot be changed during data capture.