GRAPHTEC CE LITE-50, User Manual

Page: 90 / 128

5-12
Chapter 5 Detailed Settings
Cutting 3 Tests to include Setting Values ± 1
1.
6HWWKHVDPHPHGLDDQGWRRODVWKHDFWXDOFXW
2.
2QWKH+20(VFUHHQXVHWKH " and " " to select the
&21',7,2112WRSHUIRUPWKHFXWWHVWZLWKDQGWRXFKWKH
&877(67WRRSHQWKHVHWWLQJVFUHHQ
3.
6HOHFWWKH3,(&(6IRUWKHFXWWHVW
4.
6HOHFWWKHLWHP)25&(RU&877(52))6(7\RXZLVKWRFRQÀUP
5.
8VHWKH " and " " to move the tool to the cut starting position and touch
the 2.WRFXWWKUHH " marks.
–1 0 +1
Cutting Order
CAUTION
When the "OK" is touched, the media and tool
carriage will start moving. Be careful to avoid
contact with your body or any object.
7KHFXWWHVWSDWWHUQVZLOOEHFUHDWHGXVLQJVHWWLQJYDOXHVLQFUHDVHGGHFUHDVHGLQWKHFXWWLQJRUGHUVKRZQ
on the right.
&RQÀUPLQJWKH&XW7HVW
&RQÀUPWKHUHVXOWVRIWKHFXWWHVWDQGDGMXVWYDULRXVVHWWLQJVVRWKDWWKHVHWWLQJVDUHRSWLPDO5HSHDWWKH
SURFHVVRISHUIRUPLQJFXWWHVWVDQGDGMXVWLQJVHWWLQJVXQWLOVHWWLQJVIRUDQH[FHOOHQWFXWDUHHVWDEOLVKHG
Adjusting the Offset Value
&RQÀUPWKHFRUQHUVRIWKHWULDQJOHDQGVTXDUH,IWKHFRUQHUVDUHEHLQJFXWH[FHVVLYHO\RUQRWEHLQJFXW
SURSHUO\DGMXVWWKHRIIVHWYDOXH
The correction amount
is insufficient.
Increase the offset value. The offset value is
appropriate. The correction is excessive.
Lower the offset value.
Adjusting for Kiss Cuts
3HHORIIWKHWULDQJOHDQGPDNHDGMXVWPHQWVVRWKDWDOLJKWWUDFHRIWKHFXWLVOHIWRQWKHEDFNLQJ
,IWKHEDFNLQJKDVEHHQFXWDOOWKHZD\WKURXJKHLWKHUWKHFXWWLQJIRUFHLVWRRKLJKRUWKHEODGHGHSWKLV
H[FHVVLYH,IWKHUHDUHSDUWVZKHUHDWUDFHRIWKHFXWLVQRWOHIWRQWKHEDFNLQJHLWKHUWKHFXWWLQJIRUFHLVWRRORZ
RUWKHEODGHGHSWKLVLQVXIÀFLHQW
Adjusting for Full Cuts
0DNHDGMXVWPHQWVVRWKDWWKHPHGLDLVFXWDOOWKHZD\WKURXJK
,IWKHPHGLDLVQRWFXWDOOWKHZD\WKURXJKHLWKHUWKHFXWWLQJIRUFHLVWRRORZRUWKHEODGHGHSWKLVLQVXIÀFLHQW
%HVXUHWRXVHWKHFDUULHUVKHHWZKHQFUHDWLQJIXOOFXWV
Adjusting for Use of the Drawing Pen
$GMXVWWKHSHQIRUFHVRWKDWWKHSORWLVQRWRZHYHUDVLQFUHDVLQJWKHSHQIRUFHZLOOVKRUWHQWKHOLIHRI
WKHSHQORZHUWKHSHQIRUFH\HWRQO\WRDGHJUHHZKHUHWKHSORWGRHVQRWEHFRPHEOXUUHG