Graphite 59G343, Manual, Page: 12 / 80

12
OPERATION AND MAINTENANCE
Unplug the power cord from the mains socket before commencing any activities related to
installation, adjustment, repair or maintenance.
Ɣ
Always keep the sander clean.
Ɣ
Remember to always keep the ventilation holes of the sander casing pervious.
Ɣ
Never use any caustic agents for cleaning plastic parts.
Ɣ
In case of excessive commutator sparking check technical condition of carbon brushes of the motor.
REPLACEMENT OF BACKING PAD
Damaged backing pad ( 4 ) must be replaced immediately.
Ɣ
Unscrew four screws that fix the backing pad ( 4 ).
Ɣ
Remove and replace the backing pad.
Ɣ
Screw the fixing screws.
REPLACEMENT OF CARBON BRUSHES
Replace immediately used up (shorter than 5 mm), burnt or cracked motor carbon brushes. Always
replace both brushes at a time.
Entrust replacement of carbon brushes only to a qualified person. Only original parts should be used.
All faults should be repaired by service workshop authorized by the manufacturer.
TECHNICAL PARAMETERS
RATED PARAMETERS
Orbital Sander
Parameter Value
Supply voltage 230 V AC
Current frequency 50 Hz
Rated power 240 W
No load rotational speed 12000 rpm
Oscillations per minute 24000 spm
Oscillation travel 2 mm
Size of backing pad 125 mm
Size of sanding paper
125 mm
Protection class II
Weight 1,24 kg
Year of production 2016
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure Lp
A
= 85 dB(A) K = 3 dB(A)
Sound power Lw
A
= 96 dB(A) K = 3 dB(A)
Weighted value of vibration acceleration a
h
= 9,7 m/s 2 K=1,5 m/s 2
ENVIRONMENT PROTECTION
Do not dispose of electrically powered products with household wastes, they should be utilized
in proper plants. Obtain information on wastes utilization from your seller or local authorities.
Used up electric and electronic equipment contains substances active in natural environment.
Unrecycled equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.
“Grupa Topex Spółka z ograniczoną odpowiedzialnością” Spółka komandytowa with seat in Warsaw at ul. Pograniczna
2/4 (hereinafter Grupa Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not
limited to, text, photographies, schemes, drawings and layout of the instruction, belong to Grupa Topex exclusively and are
protected by laws accordingly to Copyright and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach
pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments). Copying, processing, publishing, modifications for
commercial purposes of the entire Instruction or its parts without written permission of Grupa Topex are strictly forbidden
and may cause civil and legal liability.