www.GrapeSolar.com
Tel. 1
-
877
-
264
-
1014 (toll free), 1
-
541
-
349
-
9000
Document Version 200929
©Copyright 2020, Grape Solar, Inc. All Rights Reserved
100 Watt Waterproof Charging Kit
(GS
-
100
-
KIT
-
IP68)
Quick Connect Guide
IMPORTANT
: Please read GS
-
10A
-
PWM
-
IP68 PWM charge
controller owner
’
s manual and GS
-
STAR
-
100W connection
guide (both included with products) before assembling kit.
For additional information about Grape Solar products:
, or
call
1
-
877
-
264
-
1014
for live telephone support.
GS
-
100
-
KIT
-
IP68 PHOTOVOLTAIC
POWER GENERATION SYSTEM
QUICK CONNECT GUIDE Rev. 200929
1
Check your order to make sure that all parts are included:
GS
-
STAR
-
100W Solar Panel
GS
-
PWM
-
10A
-
IP68
*The GS
-
PWM
-
10A
-
IP68 is designed to charge 12 volt
lead
-
acid battery ONLY, including AGM, flooded, sealed
battery types.
Additional tools and equipment you will need:
◦
12
-
Volt Deep
-
Cycle Battery Bank
◦
Voltmeter (for Troubleshooting)
Mount the 100
-
watt solar panel
so that it is facing due South at approximately the same angle as your
latitude. The ideal area has full sun and no shading. If the following connections are made during daylight,
cover the panel with cardboard, cloth, or a similar opaque material so that the panel does not output power.
Connect the ring lug ends of GS
-
PWM
-
10A
-
IP68
to the positive and negative terminals of a 12V deep cycle
battery (not included in kit). If your battery has sufficient charge, the LED light on the far side of the charge
controller should light up.
2
3
[
diagrams not to scale]
*
12V deep cycle battery not included with kit
[
diagrams not to scale]
[
diagrams not to scale]