Granville-Phillips Mini-Convectron 275 Series, Installation, Operation And Service Instructions, Page: 10 / 52

2 Mini-Convectron
®
Module with DeviceNet
®
Digital Interface
Chapter 1
1.5 Service Guidelines Some minor problems are readily corrected on site. For customer service,
phone
1–303–652–4400 or 1–800–776–6543 within the U.S.A., or email
co-csr@brooks.com. If the product must be returned for service, request a
Return Authorization (RA) from Granville- Phillips. See the Service Form at
the end of
Chapter 6
. Do not return products without first obtaining an RA.
Shipping damage on returned products as a result of inadequate packaging
is the Buyer’s responsibility.
When returning equipment to Granville-Phillips, please use the original
packing material whenever possible. Otherwise, contact your shipper or
Granville-Phillips for safe packaging guidelines. Circuit boards and modules
separated from the controller chassis must be handled using proper anti-
static protection methods and must be packaged in anti-static packaging.
Granville-Phillips will supply return packaging materials at no charge upon
request.
1.6 FCC Verification This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this instruction manual, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for
help.
1.7 UL Listed This product, when labeled, is listed to UL 3101 Standard for Safety,
Laboratory Equipment by Underwriters Laboratories Inc. (UL).