Grant UFLEX EDGE, Manual

Page: 15 / 48

14
Pairing Accessories
You can pair a total of 16 accessories to a single UFLEX EDGE thermostat.
Wireless Air Sensor
Once a remote sensor is added, the thermostat will automatically display an average
temperature between the ‘Wireless Air Sensor’ and the on-board sensor inside
the thermostat. Averaging will also be calculated between multiple Air Sensors.
Window/Door Wireless Contact Sensor
If any one of the ‘Window/Door’ contacts is broken, the UFLEX EDGE
thermostat will be alerted and will activate ‘Frost Protection’ mode.
The display will now show the icon (right) to indicate a window or door has
been opened. Heating will not resume while this icon remains on screen.
Pairing the Air Sensor and Window/Door Contact.
• Use the ‘Left/Right’ arrow keys to highlight then press and hold
the button for 3 seconds to turn off the display .....................................
• Tap the ‘Up’ key to select ‘Setup’ then press ...............................................
• Press the ‘Down’ key until you see the letter ‘P’ displayed at the top of
the screen then press .........................................................................................
Wireless Air Sensor. Door/Window - Wireless Contact Sensor*
(Not available in Time Clock mode).
*Compatible accessories from Heatmiser UK Ltd.
UFLEX EDGE