19
Accepting the preset programmes
If you are happy with the preset times shown in the table on page
17you need take no further action.
Changing the preset programmes
Before you change the preset programmes
Your installer will have set the unit to operate in one of the following
modes:
5/2 day - one set of programmes for weekdays and another for
weekends (page 19-20).
24 hr - one set of programmes for the whole of the week (page 20).
Alternatively
A/B - The unit can also be set by you to provide two programme
blocks, either of which can be applied to diff erent days of the week.
If this is required refer to page 21 for instructions on how to turn on
this feature.
Please Note
The unit must be programmed in sequence, event times cannot be
set out of sequence.
If you want to leave a preset time as it is, simply press
PROG
to
move to the next setting.
If you want to return the unit to
RUN
, press
PROG
and hold until the
display returns to the previous
RUN
mode. Alternatively leave alone
and the unit will automatically return to
RUN
after 2 minutes.
Your installer will have set your unit to programme 6, 4 or 2 events
per day. This will determine the number of events per day that you
are able to programme.
Changing the preset programmes in 5/2 day mode
For Weekdays
a) Press
PROG
until the fi rst preset time and
temperature (Event 1 Days MON, TUE, WED,
THU, FRI) appears in display.
U
ser Instruc
tions
GB
