Getting started with VSD-E & VSD-XE 160
Manual Ver. 1.10
2.
Building a test setup for drive tuning
Wiring
Begin wiring by making motor & encoder connections to D-Sub connectors.
Use motor/encoder data sheet & VSD-
E manual to match wires to pins.
Figure 3: Wired encoder & motor D-sub connectors (covers opened)
Before powering up anything, double or triple
check all connections
, especially encoder voltage supply wires. Ensure
that there is no short circuits wiring.
Connecting parts
Build a test setup that resembles
Figure 1
(see page 1)
.
Unless you are experienced VSD-E/XE user, use limited current power supplies
(such as adjustable lab power
supplies) to do initial motor configuration and testing.
Once everything is connected & powered, connect USB adapter to drive and proceed to next chapter.
www.granitedevices.fi
2/6
2009-06-24
Figure 2: Using the motor connection PCB to ease D-Sub wiring (supplied with every VSD-E/XE).
