O
perating Instructions for Hand Pallet Truck
76072170
10
WARNING: Never perform different kinds of work at the same time and with multiple
people.
WARNING: Failure to follow maintenance instructions can lead to serious accidents
and malfunctioning.
WARNING: Do not let any part of the body get between moving parts.
IMPORTANT: Failure to follow the lubrication instructions can cause damage and
malfunctions.
The pallet truck is almost no-maintenance.
6.2
Oil
Please check the oil level every 6 months. Use hydraulic oil according to ISO VG32 with
a
viscosity of 30 mm2/s at 40°C. The quantity is approx. 0.4l.
6.3
Venting
Air could get into the hydraulic oil during transport or pumping movements in an upright
position. This could prevent the forks from lifting during pumping movements in the lever
position “RAISE”. The air can be removed as follows: set the control lever (117 or 120G) to
“LOWER”, then move the drawbar up and down a few times.
6.4
Daily inspection and maintenance
Daily checks reduce wear as much as possible. Particular attention should be paid to the
wheels and axles, as threads or rags etc. could block the wheels. Once the operation is
finished, the fork should be lowered unloaded.
6.5
Lubrication
All bearings and axles have been treated with a high-quality, long-lasting grease at the
factory. At monthly intervals you should supply grease to all lubrication points, especially
when the lift truck has been cleaned.
7.
Storage and transport
Always store the pallet truck in a dry and frost-proof room.
Check the condition of the equipment before storage and perform maintenance before taking
it out of use, so that your pallet truck is ready quickly the next time you need it.
8.
Disposal
The separate, environmentally friendly disposal of materials encourages recycling of
materials. Therefore, after expiry of the normal service life, the equipment itself and all related
components, including the lubrication, packaging and wear parts, should be disposed of at a
recyclables collection point.