background image

Favorite Pattern Designating & Calling

Favorite Pattern Designating

When your favorite ashing pattern is running , keep pressing the “Momentary switch” for 2sec, then all the lights will xed
illuminating for 1.5sec, then extingush. your favorite ashing pattern has been stored sucessfully

MOMENTARY 

SWITCH

GROUND 

WIRE(-) 

2 WAY 

SWITCH 

+ V DC

2 Sec

x 1

1) TO SET THE MASTER: Before attaching the momentary switch, turn power ON and the lights will begin to ash. Touch the 

 of your

YELLOW WIRE

    Master Light choice to the 

BLACK WIRE

 

(-) for 5 seconds to designate this light as the Master. Once you see a change (Flash or Steady Light),

    this Master light will be conrmed and will automatically set all the secondary lights to the same ash pattern as the Master. If unsuccesful,
    turn power OFF and ON again and repeat this step. (It is reccomended that the Master Light be the rst point of contact to the battery.)
2) Once the Master is set, permanently connect its 

 to the MOMENTARY SWITCH (not included). Then connect an extra wire from the

YELLOW WIRE

    MOMENTARY SWITCH to the 

BLACK WIRE

 

(-) that is connected to the ground of the power supply or the chassis.

3) Once wiring is complete, all the secondary lights will automatically change to any pattern that the Master light is set to.

Master Setting

When you want the lights execute your favorite ashing pattern , press the “Momentary switch” twice in 0.5sec, 
the lights will execute your favorite ashing pattern.
There are 3favorite ashing patterns maximum can be designated for one light system , when you call the 3favorite ashing patterns , 
press the “Momentary switch” twice in 0.5sec, the
ashing patterns will shifted circularly in the sequence of the favorite patterns designating

Favorite Pattern Calling

MOMENTARY 

SWITCH

GROUND 

WIRE(-) 

2 WAY 

SWITCH 

+ V DC

1 Sec

x 2

TWO GROUP WIRING & OPERATION

DUAL GROUP MODE

 (ALTERNATING & SYNCHRONIZING MODES): 

All lights will be divided in 2 Groups. Depending on the ash pattern selected, Group 1 lights can alternate or 
synchronize with Group 2 lights. 

   

GROUP 1

(MAX 10PCS)  

 

MASTER 

 

SECONDARY 

 

SECONDARY 

 

SECONDARY 

WHITE

SYNCHRONIZATION WIRE 

MOMENTARY 

SWITCH

GROUND 

WIRE(-) 

2 WAY 

SWITCH 

GROUP 2

(MAX 10PCS)   

FLASHING PATTERN SWITCHING 

WIRING

+ V DC

+ V DC

Reviews: