To the owner
Congratulations on purchasing a Grandview Deluxe Pull
Down Screen, This screen is designed to produce the
sharpest, most pleasing pictures with
maximum convenience.
Before you start
Use the correct tools: a level, a measuring tape and
•
a pencil to mark with.
Measure the bracket position accurately before
•
attaching to the wall or ceiling.
Do not mount the brackets the full width of the
•
casing, allow at least 100mm at each end for
horizontal picture alignment.
Wall mount
Mount the brackets firmly eg: into wall studs or bricks.
Ensure the brackets are in level.
Undo the screen as shown below.
Locking screw
Locking piece
Slide the screen onto the brackets and snap into the
groove and tighten the screw.
Up groove
Down groove
Ceiling installation
Attach the ceiling brackets as shown.
Slide the screen and lock
Ensure the wall bracket is
secured to the casing of the
screen before hanging.
Retract the screen by pulling down the handle and then
let go of it. The screen will retract at a controlled speed.
Operation
Lower the screen by pulling down the handle. Once
in position, hold for 3 seconds: the self locking
mechanism will lock screen into position.
3 Sec
.
Screen retracting slowly.
Screen fully retracted.
