3
4
Using a tape measure, to measure the distance between the two keyholes on the casing ( Figure 1 ).
According to the measurement, use the drill to drill identical holes of the appropriate size on the ceiling
(use a smaller drill bit than the actual screws) and ensure that it is level ( Figure 2 & 3 ). screw in the hook
screws (not provided), and lift the screen into the hook screws to hang ( Figure 4 ). to ensure that the
screen is level, use a leveller to check ( Figure 5 ).
Ceiling Mount
Installation
Hanger
Wall mount
Ceiling mount
Instructions
1. .
2. When retracting the screen, simply pull down screen slightly to release
. Guide the screen up with the handle, and release when the screen is fully retracted.
Pull the screen handle down and ensure it locks in position
pull down the screen handle
slightly to release
Picture 1
Picture 2
