How to install the battery:
1.Turn the controller around, push to open the cover as guide arrow.
2.Put the battery in according the guide of cathode and anode.
3.Close the cover.
UP
DOWN
STOP
LED
remote controller
Controller button instruction
1.To raise screen press "UP .
2.To hold screen at desired position press STOP .
3.To lower screen press DOWN .
1.
2
will
3
will
if
4
5
6
7
"
"
"
"
"
Caution:
The shortest distance between receiver and controller is 0.5 meter.
.Controller
work within 30 degree away horizontally from t he cen ter of recei ver
point within 8 meters from the screen.
.The controller
not work the signal was coveredby something.
.Keep the controller far away from high temperature and humid situation.
.Please change the battery when the signal is weak.
.Please take the battery out if the controller was not being used for long time.
.Please choose the same type battery as original supplied.
4. To raise the screen little at your desired position press MICRO-UP
5. To lower the screen little at your desired position press MICRO-DOWN
1GD
¡ª
IRan
MICRO-UP
MICRO-DOWN
Instructions
