Grandstream Networks UCM6200 Series, User Manual

Page: 52 / 469

P a g e | 51
UCM6200 Series User Manual
Version 1.0.20.38
The following table summarizes the layout of the LCD menu of UCM.
Table 3: LCD Menu Options
View Events
•
Critical Events
•
Other Events
Device Info
•
Hardware : Hardware version number
•
Software : Software version number
•
P/N : Part number
•
WAN MAC : WAN side MAC address
•
LAN MAC : LAN side MAC address
•
Uptime : System uptime
Network Info
•
WAN Mode : DHCP, Static IP, or PPPoE
•
WAN IP : IP address
•
WAN Subnet Mask
•
LAN IP : IP address
•
LAN Subnet Mask
Network Menu
•
WAN Mode : Select WAN mode as DHCP, Static IP or PPPoE
•
Static Route Reset : Select this to reset static route settings.
Factory Menu
•
Reboot
•
Factory Reset
•
LCD Test Patterns
Press DOWN and OK buttons to scroll through and select different LCD
patterns to test. Once a test is done, press the OK button to return to the
previous menu.
•
Fan Mode
Select Auto or On.
•
LED Test Patterns
All On, All Off, and Blinking are the available options. Selecting Back in the
menu will revert the LED indicators back to their actual status.
•
RTC Test Patterns
Select either 2022-02-22 22:22 or 2011-01-11 11:11 to start the RTC (Real-
Time Clock) test pattern. Check the system time from either the LCD idle
screen or in the web portal
System Status->System Information-
>General page. To revert back to the correct time, manually reboot the
device.