manualshive.com logo in svg

Grandstream Networks UCM6100 Series, Manual Manual

Share
Download
Grandstream Networks UCM6100 Series Manual Manual Download Page 15

 

 

UCM6100 Security Manual                                                              Page 14 of 23 

TLS 

 

The UCM6100 administrators may consider securing SIP packets sent across an untrusted network. Using 

TLS could be a solution. It will authenticate servers and clients, and then encrypt SIP messages between 

the authenticated parties. 

 

TLS can be configured under UCM6100 web GUI->PBX->SIP Settings->TCP/TLS page. 

 

 

Figure 8: PBX->SIP Settings->TCP/TLS 

 

1. 

Set “TLS Enable” as “Yes” to enable TLS on UCM6100. 

2. 

Configure “TLS Do Not Verify”, “TLS Self-Signed CA” and “TLS Cert” properly to achieve basic TLS 

authentication and encryption. 

 

 

TLS Self-Signed CA 

This  is  used  when  UCM6100  acts  as  a  client,  to  authenticate  the  server.  If  the  server  the 

UCM6100 connecting to uses a self-signed certificate,  you should  have their certificate  installed 

Summary of Contents for UCM6100 Series

























Reviews:

No comments

Brands by name

Popular brands

Load more brands