Testing and Troubleshooting
To place a test call, you must first configure all of the parts of Ignition normally required for
alarm notification. This includes:
1. Create a user in your User Source
2. Assign the user a phone number (
NB
: The phone number must be valid for the phone
line, as it will be dialed directly. It will usually include the long distance country code, and
should not include dashes. For example: 15551235432)
3. Create an On
Call Roster, assign the user
4. Create an alarm pipeline, with a notification block set to use the VOIP profile, and the
correct On
Call Roster.
5. Create an alarm set to use the alarm pipeline as the “active pipeline”.
When a call is placed, you will be able to monitor its progress from Status>Voice Alarming in the
gateway.
In the HT
813, you should see the status of the FXO port change:
Summary of Contents for HandyTone 503
Page 5: ......
