Configuring the Grandstream HandyTone 813 (HT-813)
Rev 1.0, 4/12/19
Preface
This guide provides information and hints for configuring the Grandstream HandyTone 813
(HT
813) to work with Ignition Voice Alarming. The HT813 is a basic telephony appliance with
both an FXS port (for a telephone) and an FXO port (for the phone line). While it is not a
complete VOIP server, it does support SIP, and can be successfully used to route calls from
Ignition to PSTN, through the FXO port.
This guide assumes that you have access to the HT813 user manual, available from
Grandstream’s product website:
http://www.grandstream.com/sites/default/files/Resources/HT813_User_Guide.pdf
Setup
Note
: After modifying each page, click “Apply” at the bottom to save the changes. Changes are
not automatically saved when moving from page to page.
1) Connect to the web interface
Follow the instructions in the user manual section titled “ACCESS THE WEB CONFIGURATION
MENU”.
When connected to the “LAN” port, the default ip address is:
192.168.2.1
The default password is:
admin
Summary of Contents for HandyTone 503
Page 5: ......
