HandyTone 286 User Manual
Grandstream Networks, Inc
.
8
5
Basic Operations
5.1
Get Familiar with Key Pad and Voice Prompt
HandyTone-286 has stored a voice prompt menu for quick browsing and simple configuration. To
enter this voice prompt menu, simple pick up the phone and press the button on the HandyTone-286;
or pick up the phone and dial “***”. The following table shows how to use the voice prompt menu to
configure the device.
Menu
Voice Prompt
User’s Options
Main Menu
“Enter a Menu Option”
Enter ‘*’ to next option and “#” back to
main menu, or
Dial 01 – 06, 47, 86 or 99 Menu option
01
“Static IP Mode”, or
“Dynamic IP Mode”
Dial ‘9’ to toggle the selection.
If user selects “Static IP Mode”, user need
configure the all IP address information
through menu 02 to 05. If user selects
“Dynamic IP Mode”, the device will
retrieve all IP address information from
DHCP server automatically when user
reboots the device.
02
“IP Address” + IP address
The current WAN IP address is announced
Enter 12-digit new IP address if in Static IP
Mode.
03
“Subnet” + IP address
Same as Menu option 02
04
“Gateway “ + IP address
Same as Menu option 02
05
“DNS Server” + IP address Same as Menu option 02
06
“TFTP Server “ + IP
address
Same as Menu option 02
TFTP server is used to update the firmware
of the device.
47
“Direct IP Calling”
When entered, user will be prompted a dial
tone, dial the 12-digit IP address to make a
direct IP call. (For detail, see “4.2.2 Make
a Direct IP Call”.)
86
“No Voice Messages”; or
“Voice Messages Pending”
If there are voice messages, user can dial
‘9’ and dial pre-configured phone number
to retrieve voice message.
99
“RESET”
Dial ‘9’ to confirm the RESET; or
Enter MAC address to restore factory
default setting (For detail, see section 8)
“Invalid Entry”
Automatically return to Main Menu