Grandstream Networks, Inc.
GXV300x User Manual
Page 22 of 54
Firmware 1.2.3.7
Updated: 12/2010
•
Keypad/LED Diagnostics
All LEDs will light up
Press any key on the keypad, to display the button name in the
LCD. Lift and put back the handset or press Menu button to exit
the diagnostic mode.
•
LCD Diagnostics
•
Camera/LCD Test Pattern
•
Video Loopback
•
Audio Loopback
Speak into the handset. If you hear your voice in the handset,
your audio works fine.
Press Menu button to exit the mode.
•
PSTN Loopback
•
Ethernet Loopback
Connect a cross Ethernet cable from your “PC” port, and the
“LAN” port. The test result is displayed on the screen. Use this
feature to diagnose the state of health of the RJ45 jacks. Press
Menu button to exit the diagnostic mode.
Note: Running the Ethernet Loopback mode with a normal con-
nection will cause IP loss.
Press ‘
←
’ to return to the main menu.
Reboot
Press Menu button to reboot the device
Register Account
Choose Account to force the phone sends out registration request
About
Exit
Exit from this menu.
C
ONFIGURATION WITH
W
EB
B
ROWSER
The GXV300x embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML
pages allow a user to configure the IP Video phone through a Web browser such as Microsoft’s IE or Mo-
zilla Firefox.
Access the Web Configuration Pages
The GXV IP Phone Web Configuration Pages URL:
http://Phone-IP-Address
where the Phone-IP-
Address is the IP address of the phone displayed on the LCD screen.
To access the phone’s Web Configuration Menu
•
Connect the computer to the same network as the phone
1
•
Make sure the phone is turned on and shows its IP-address
•
Start a Web-browser on your computer
•
Enter the phone’s IP-address in the address bar of the browser
2
•
Enter the administrator’s password to access the Web Configuration Menu
3
