background image

registered from remote networks, WAN, Internet etc.

Click on the Next step button.

Extension values

Enter values into the required field text boxes.

REQUIRED FIELDS:

Name

Enter a name for the extension being created. Example: John Smith.

E-mail

Enter the e-mail address associated with this extension. This e-mail address will receive all
system notification messages. Example: [email protected]

Department

Department to which extension will belong to. Example: Sales.

Click on the Save button.

Registering Phone

This section describes how to register Grandstream phone using Hostname or IP Address.

Hostname or IP Address

Login to phone web administration interface

Open a new browser window and enter your phone IP address in order to access the phone

web administration interface login screen. Example: http://192.168.1.22

Login to phone web administration interface with your username and password. Please note,

factory default login details are username: admin and password: admin.

Click on Accounts in the top menu.

Enter or set the following details into the respective fields.

REQUIRED FIELDS:

Account Active

Make sure the Yes radio box is selected.

Account Name

Summary of Contents for GXP1625












Reviews: