Grandstream Networks, Inc., 1297 Beacon St., 2
nd
Flr, Brookline, MA 02446 USA
Tel: (617) 566-9300, FAX: (617) 249-1987
www.grandstream.com
Figure 4: Placing tab for mounting phone to wall
Configuring the GXP2020 using a Web Browser
1.
If DHCP is enabled in your network, the phone’s IP address will be displayed.
2.
Type the phone’s IP address in your PC browser.
3.
The default administrator password is “
admin
”; the default end-user password is “
123
”.
To configure the phone via the web browser, you will need the following information:
1. IP address, subnet mask and gateway IP if using static IP.
2. SIP server and/or Outbound Proxy FQDN or IP address.
3. User subscriber information: User ID, Authentication ID, Password (provided by your VoIP
service provider).
4. GXP2020 supports “Plug-n-Call” if your ITSP (Internet Telephony Service Provider) provides this
automatic provisioning service. Ensure the phone has an internet connection (either DHCP or static IP
in your internet ready network), then power up the phone.
5. Please contact your ITSP for additional settings that may be necessary to configure the phone.
Configure the GXP2020 using the Keypad
1. Make sure the phone is idle.
2. Press the “OK” button to enter the keypad MENU to configure the phone.
3. Follow MENU options to configure the basic features of the phone – for example: the IP address
if using a static IP. For details, please check GXP Series User Manual.
Using the Keypad
1.
To enter the MENU, press round MENU button.
2.
Navigate the menu by using the UP/DOWN and LEFT/RIGHT.
3.
Press the round MENU button to confirm a menu selection.
4.
To delete an entry by pressing the MUTE button.
5.
The phone automatically exits MENU mode with an incoming call, the phone is off-hook or the
MENU mode if left idle for 20 seconds.
GXP2020 Key Pad Configuration Menu
Call History
Displays histories of incoming, dialed and missed calls.
Status
Displays the network status, account statuses, software version
and MAC-address of the phone.
Phone Book
Displays the phonebook.
Instant Messages
Goes to Instant Messages if the Presence is supported by the
service provider or PBX.
Direct IP call
Displays the IP-call options menu.
Last updated on April 1, 2008
4
