~1~
~2~
EN
PACKAGE CONTENTS
OVERVIEW
This guide provides instructions for mounting your GRP2600 series phone
to the wall. Provided instructions apply to all GRP2600 series models and
all GRP_WM bracket models. There are two wall mount bracket models:
• GRP_WM_S for GRP2612/P/W and GRP2613
• GRP_WM_L for GRP2614, GRP2615 and GRP2616
Note:
The wall mount bracket is sold separetely (not included in GRP2600
series phone package).
1x Quick Installation
Guide
GRP_WM_S
OR
GRP_WM_L
Note:
Screws and anchors required for wall mount installation are not
included in this package.
Make sure to adjust the hookswitch tab position up to hold the handset
while the phone is mounted on the wall (tab wih extension down is recom-
meded for desktop usage).
1. Pull out the tab from the handset cradle.
2. Rotate the tab to extension up.
3. Plug it back into the slot with the extension up.
Tab with
extension up
Tab with
extension down
Handset Rest
1
2
3
ADJUSTING HOOKSWITCH TAB
INSTALLING WALL MOUNT BRACKET
1. Put the wall mount’s ribs into the unit’s groove.
2. Press this position and install the wall mount.
3. The wall mount is installed completely.
1
2
3
GRP2600 phone
Wall mount
bracket
Wall mount
bracket
MOUNTING THE PHONE TO THE WALL
1. Use the wall mount bracket to mark two vertical dots using "wall
mount slots" on the wall where the phone will be installed.
2. Using a drill, make a hole on each marked dot. Put a plastic anchor
and screw (not provided) on each hole. Leave enough space to at-
tach the wall mount bracket to the wall.
3. Mount the GRP2600 phone with wall mount bracket attached to the
wall using wall mount slots.
1
2
3
Wall mount Slots
