Grandstream Networks Grandstream GXP-1200 Manual Download Page 7

 

Grandstream Networks, Inc. 

GXP User Manual 

Page 7 of 44  

                                                                              Firmware 1.2.5.3 

                                   Last Updated: 03/2011 

 

Figure 2:  GXP–2000 Internal Headset Wiring Schema 

 

 
NOTE:
 For GXP-2000 HW REV. 0.3 and 0.4, a 3.5mm to 2.5mm plug converter is required to use a 2.5mm 
headset.  The converter can be purchased at any electronics store.  
 
 
 
 
 

S

AFETY 

C

OMPLIANCES

 

 

The GXP phone complies with FCC/CE and various safety standards. The GXP power adaptor is compliant 
with  the  UL  standard.    Only  use  the  universal  power  adaptor  provided  with  the  GXP  package.    The 
manufacturer’s warranty does not cover damages to the phone caused by unsupported power adaptors. 
 

W

ARRANTY

 

 

If you purchased your GXP from a reseller, please contact the company where you purchased your phone 
for  replacement,  repair  or  refund.    If  you  purchased  the  product  directly  from  Grandstream,  contact  your 
Grandstream Sales and Service Representative for a RMA (Return Materials Authorization) number before 
you return the product.  Grandstream reserves the right to remedy warranty policy without prior notification. 

http://arttel.ru

Summary of Contents for Grandstream GXP-1200













































Reviews: