GAC2570 User Manual
Version 1.0.1.23
P a g e
|
36
•
LLDP
Turn on/off LLDP on the GAC2570. If turned on, the GAC2570 will be able to discover the LAN polices
as set up in the switch side to obtain network settings such as VLAN tag, Layer 2 QoS 802.1p priority
and Layer 3 QoS in a plug-and-play manner.
•
LLDP TX Interval (seconds)
Specifies the time interval, in seconds, between successive LLDP-MED transmission cycles
•
Applied to the Second Layer of Data QoS 802.1Q/VLAN (Ethernet)
This field contains the value used for layer 2 VLAN tagging for the Ethernet network.
The Default value is 0.
•
Applied to the Second Layer of Data QoS 802.1p/VLAN (Ethernet)
This assigns the priority value of the Layer 2 QoS packets on the Ethernet Network.
The Default value is 0.
•
Layer 3 SIP QoS
This field defines the layer 3 QoS parameter for SIP packets.
This is the value used for IP Precedence, Diff-Serv or MPLS. The Default value is 26.
•
Layer 3 Audio QoS
This field defines the layer 3 QoS parameter for audio packets. This is the value used for IP Precedence,
Diff-Serv or MPLS. The Default value is 46.
Proxy Settings
For some network setup, it is required to connect to the Internet via proxy server. Manually configure
“HTTP/HTTPS Proxy hostname”, “HTTP/HTTPS Proxy port” and “Bypass proxy for” in proxy settings for
the device to get Internet connection successfully.