P a g e
|
34
DP760 User Manual
Version 1.0.3.34
Manual Association
To manually associate your DP760 DECT Repeater to your DP750 Base Station:
1.
Access the Web GUI of your DP760 using the admin’s username and password. (Default username
and password are
admin
/
admin
). Refer to [
2.
Navigate to
DECT
General
Settings
and set
Use Manually Configured RFPI
to
Yes
.
3.
On
Manually Configured Base RFPI
field, configure your DP750 Base Station RFPI address.
Note:
The RFPI Address of your DP750 Base Station is available under the Web GUI
Status
DECT
Status
Base DECT RFPI Address
.
4.
Click
Save and Apply
to confirm the new settings.
5.
Go to DECT Repeater Status page and click on “Manual-Lock to xxxxxxxxxx”.
6. The DP760 DECT Repeater will automatically pair to DP750. If the association is correctly associated,
all the LEDs will remain solid on and the repeater status will be updated as following.
Figure 12: Repeater Status – Associated (Manual Association)
Note:
Make sure that
Repeater
Mode
is enabled on your DP750 Base Station.
