1.12
Holes are present in base kit for anchoring bolts see and .
You determine and acquire proper fastener prior to installation for your surface.
Discard the BA-A1 and BA-S10 for deck or cement pad installation.
Double check your base kit is set up correctly, notches should be spaced every 23 inches or 2
feet, see .
Use lag bolt
or concrete anchors
to attach base.
(Fasteners not included).
B
Deck or
Patio
Assembly
Use an appropriate fastener
to attach to your surface
through these access holes.
BA-C4
BA-S6
BA-S2
BA-S03
BA-M03
BA-S1
BA-C3
BA-S2
HOLE FOR ANCHOR
BOLT OR SCREW.
BASE KIT DECK INSTALLATION
**BASE MUST BE LEVEL & SQUARE,
FOUNDATION MUST BE PROPERLY ANCHORED PRIOR TO GREENHOUSE ASSEMBLY
15
STEP ONE
GRANDIO
T I P
Make sure base is squared
and level before setting
anchors. Use a measuring tape to ensure all
corners are the same. Use level on all four
sides.
If surface is uneven you may want
to purchase large washers that
will fit under the base and allow
fasteners to go through to use as
a shim for leveling the base kit.
8x12 SHOWN IN DIA
GRA
M
WARNING
NOTCHES SHOULD
NEVER BE NEXT TO
EACH OTHER
Summary of Contents for GRANDIO ELITE 8x12 2015
Page 71: ...NOTES NOTES 70 NOTES...
