grandimpianti DG6, Installation, Maintenance And User Manual

Page: 43 / 243

4. Attach the plastic cups for fixing the tumble
dryer’s front feet to the washing machine’s top
cover. This is essential, as only when the
tumble dryer’s feet are resting in the plastic
cups can you be sure that the tumble dryer is
correctly positioned on the washing machine.
Break off tag A on the cup fitted on the
right-hand side and tag B on the cup fitted on
the left-hand side. Then remove the paper from
the self-adhesive surface under the plastic
cups.
$
%
$
%
5. Fit the plastic cups so that the “tags” marked
with arrows are against the front edge or side
edge of the cover and press them firmly onto
the cover. Then break off the remaining tags.
6. Push out the knock-out hole on the back of the
tumble dryer (you must not remove it, just open
it) using a hammer and screwdriver.
7. Push the tumble dryer in under the metal
brackets. While doing this, keep the front edge
raised by 10 mm to 20 mm.
8. Lower the tumble dryer’s front feet into the
plastic cups and adjust the tumble dryer to
ensure it is level.
Adjusting the feet
Screw the feet in or out so that the tumble dryer
is both stable and level.
Air evacuation
The air vented from the tumble dryer must be
channelled to an exhaust air duct or an exhaust
outlet in the wall using the supplied vent hose.
18
Installation
3DUWVHULDO