© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Programming MDC
801293
28
15. NORMAL 40 Prewash Fill/Agitate Time
“-015”
This option allows the owner to set the amount of
prewash fill/agitate time for the NORMAL 40 cycle.
How to Program NORMAL 40 Prewash
Fill/Agitate Time
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode
.
2. Press the DELICATES 30 (
∧
) or the PREWASH
(
∨
) keypad until “PrOg” appears in the Four-
Digit Display.
Figure 37
3. Press the START (enter) keypad and “-001” will
appear in the Four-Digit Display.
4. Press the DELICATES 30 (
∧
) or the PREWASH
(
∨
) keypad to scroll through the programmable
options until “-015” appears in the Four-Digit
Display.
Figure 38
5. When “-015” appears in the Four-Digit Display,
press the START (enter) keypad. The current
number of minutes set for NORMAL 40 Prewash
Fill/Agitate Time will appear in the Four-Digit
Display.
6. Press the DELICATES 30 (
∧
) or the PREWASH
(
∨
) keypad to increase or decrease the current
number of minutes displayed in the Four-Digit
Display to the desired number of minutes.
NOTE: NORMAL 40 Prewash Fill/Agitate Time
can be set from zero (0) to 15 minutes. If time is set
to zero, NORMAL 40 Prewash setting will not be
available.
7. Press the START (enter) keypad when the correct
number of minutes appears in the Four-Digit
Display. The next option, “-016”, will appear in
the Four-Digit Display.
NOTE: To program “-016” (NORMAL 40 Wash
Fill/Agitate Time), refer to option 16. To program
other options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable
option, not a value.
2. While pressing and holding the NORMAL 90
keypad with one hand, press the NORMAL 60
keypad with the other hand. The control will
revert back to the previous mode of operation.
COM1R
COM20R
Summary of Contents for BTEL15*N4065
Page 2: ......
