■
Package Contents
①
Main unit. P/N_SP0104-U01.
②
5VDC Power Supply.P/N_VDC0503.
③
Operating Insrtuctions.P/N_INSSP0104-U01.
④
IR TX UNIT.
NOTE:
Cables are optional
■
Connections and Operations
1) Connect the HDMI input sources into SP0104-U01(Input cables are
optional).
2) Connect two CAT-5E/6E cables to both the STP/UTP outputs of
SP0104-U01 and inputs of STP/UTP receiver (such as EX0101-U51/53
etc). Please pay attention to the sequence of the two cables,
CAT5e-1->CAT5e1, CAT5e-2->CAT5e2. (The cable termination must
follow the standard of EIA/TIA 568B, if Single UTP mode, just connect
CAT5E-2).
3) Connect the HDMI output (such as HD-LCD/HD-DLP) into the STP/UTP
receiver.
4) Connect the IR RX receiving cable into STP/UTP receiver IR RX and
connect The IR TX cable into SP0104-U01 IR emitter.
5) Insert the DC side of 5v power supply into SP0104-U01 and then connect
the AC side of the power supply into the wall outlet.
6) Turn on the power.
Attention:
DIP Switch EDID setting index
Pag
e
3
Summary of Contents for Vision HD SP0104-U01
Page 2: ......
Page 11: ...Panel Descriptions Front Panel Back Panel Page 7...
Page 16: ......
Page 17: ......
