12
Matrix System Code Switch
In the event that two MX0808-1011-001 units are used side by side in the
rack, the matrix is capable of switching between two distinct IR System
Codes to allow control of either matrix individually via the handset.
System Code Switch
The default System setting is 0x00 but pressing the SYSTEM CODE button
on the handset THREE TIMES rapidly activates the alternative Matrix
SYSTEM CODE 0x4e, allowing control of the second unit. Pressing the
button three times again to revert back to 0x00 setting.
Note:
changing the System Code is only necessary if you are using two
identical units within close range of the IR signal. If using in different parts of
the same room it is likely that you will not need to change the setting.
Remote control at the Display end (remotely)
When controlling the matrix remotely from the display side, the matrix
automatically detects which particular output location the user is in and only
allows the selection of sources 1-8 for that location using the
button.
The right hand
button will be deactivated.
For example. If you are in the Master Bedroom with a display connected to
output 3 of the matrix, the output zone is automatically detected so options
1-8 will correspond to sources 1-8 on the matrix. Press
1-8 to scroll
through your options as you would channels on a regular TV remote.
