14
Hardware Installation
Warnings
Before the installation, disconnect the power supplies from all the
devices.
It's recommended that you do not connect or disconnect cables
from the N343 and N353 when they are powered on. To connect or
disconnect cables from N343 and N353, power them off first.
You must straight-through Ethernet cables of T568B and do not use
cross-over Ethernet cables.
Please connect and disconnect cables gently.
1. Connect the source (such as HD-DVD) to
HDMI IN
on
N343 via an HDMI
cable.
2. Connect an IR emitter cable to
IR TX
and an IR receiver cable to
IR RX
on
N343.
3. Connect a sink (such as HD-LCD
）
to
HDMI OUT
on N353.
4. Connect an IR emitter cable to
IR TX
and an IR receiver cable to
IR RX
on
N353.
5. Connect
HDBT OUT
on N343 to
HDBT IN
on N353 via a CAT5e/CAT6
cable.
6. Connect all the devices to the power supplies and start the operations.
