BEFORE OPERATING YOUR CRAFT
37 Silver Line S520 Owner’s Manual
CHECKING THE BOAT AND EQUIPMENT
Using a pressure gauge, check inflation pressure in each section of the tube (gauge not supplied).
Check the tightness of the outboard motor clamps or bolts.
Remove the cockpit drain plug and check it is working correctly.
Check the cockpit drain plug gasket, replace if necessary.
Check that sufficient fuel is available for your trip.
Be sure the outboard motor is not in gear before attempting to start.
Start the engine and check that the emergency kill switch functions correctly.
Check the load is evenly distributed.
Check that all required safety equipment is on board. See also “SAFETY EQUIPMENT” in the
section “SAFETY”.
Check that each passenger has his personal flotation device.
Check that the boat is equipped with an additional flotation device for emergency use.
Check that the boat is equipped with two oars/paddles. Check the condition of the oars and
rowlocks.
Be sure that you do not exceed the recommended maximum load indicated on the Builder’s
plate.
Make sure that each passenger is seated or has a seat available. Inform all passengers regarding
the necessity to hold on to safety handles or lines.
Be sure that the boat is equipped with at minimum 2 x boat length of suitable towing line.
Summary of Contents for Silver Line S520
