深圳市广闻实业有限公司
Page 45 of 51
2.4.1 network requirements
1. Before using the wireless transmission function of G fexiang, it is necessary to ensure
that the wireless hot spots /5G hot spots have been turned on
(wireless hotspots and 5G hotspots can only be turned on one.)Note: a. The wireless
hotspot function system is off by default. If the wireless hotspot is on, 5G hotspot and
Wi-fi shuts down automatically.
B. If the conference tablet is configured with 5G WiFi module, 5G hotspot function will be
opened by default after program update;If no 5G-WiFi module is configured, it is in a gray
state (uneditable state).
2.4.2 G share is paired with the conference board
G share insert USB ports conference tablet, tablet pairing with meeting, G share when have
a flashing blue light, is working with meeting tablet matching, and install the software, blue
lights flashing, no longer match.
Tablet (note: a meeting with most 8 pcs of G share parts match to one by one under the
same network environment, when meeting tablet response to send the application, interface
display only a connected device.)
2.4.3 G share is connected with the computer
1. Running pairing
(1) automatically run: G share inserted into the computer USB port (e.g., laptop), paired with
computer, and the accessories display lamp has been flashing blue light, is working with the
computer in the match, as shown in figure:
(2) manual operation: turn on the computer software installation (part of the anti-virus
software will intercept the running program loaded by the screen transmitter, and then
manually select the optical disk to run the DazzleShare application).
