MST-91Ai Installation guide EN Rev 1.0
9
Installation of an MPS sensor on the roof
The sensor should be installed in the gutter as close as possible to the drainpipe or the inlet funnel of
the drainpipe or in places on the roof where there is the greatest likelihood of melt water and
precipitation. It is important that melt water and precipitation fall on the active element of the sensor
and do not interfere with tree branches, neighboring roofs, roof structures, etc. The sensor must be
straightened and fixed with special clamps (included in the delivery package with the weather station)
next to the heating section, without touching it, parallel to it.
Attention! The sensor and the sensor cable for water and precipitation are under
voltage!