6
3.0
Installation of Fire Pit Insert
3.0
Install Burner Assembly as shown in Figure 6. The Burner Assembly shall be centered
and supported by
the “SUPPORT Plate”.
3.1
Connect Gas Hose to Burner Assembly as shown in Figure 6.
3.2
Install wire nuts on wires from Control Panel and Burner Assembly. Be careful to hook
up the “positive” to the red wire and the “negative” to the white wire. Wrap wire nuts
with electrical tape or some means to prevent moisture from getting in. Make sure wire
nuts are positioned at bottom of fire pit, away from bottom of Burner Assembly.
3.3
With all gas connections tight, position Burner Assembly so that it sits level on the
“SUPPORT Plate”.
Fig. 5 (Propane-Residential Installation)
Fig. 6 (Natural Gas-Commercial Installation)
Summary of Contents for 100A
Page 7: ...7 Fig 7 Propane Commercial Fig 8 Natural Gas ...
Page 11: ...11 ...
Page 12: ...12 ...
Page 13: ...13 ...
