background image

1

CONTENTS

INSTALLATION  INSTRUCTIONS

These  instructions  are  intended  as  an  aid  to  qualified 
licensed service personnel for proper installation, adjust-
ment and operation of this unit. Read these instructions 
thoroughly  before  attempting  installation  or  operation. 
Failure to follow these instruction may result in improper 
installation,adjustment, service or maintenance possibly 
resulting  in  fire,  electrical  shock,  property  damage, 
personal injury or death.

1. SAFETY...............................................................................2
2. GENERAL..........................................................................3
3. APPLICATIONS.................................................................5
4. ELECTRICAL WIRING......................................................7
5. AIRFLOW PERFORMANCE.............................................9
6. DUCTWORK....................................................................10
7. REFRIGERANT CONNECTIONS.....................................10
8. AIR FILTER (not factory-installed)....................................11
9. FILTER INSTALLATION DIMENSIONS...........................12
10. WIRING..........................................................................13

PARTS

LIMITED 
WARRANTY

5

YEAR

R-410A

REFRIGERANT

WATPM Series Air Handler

2-3-4-5 Ton Capacity

R410A

Summary of Contents for WATPM Series

















Reviews: