Grammer MAXIMO Evolution Dynamic, Operating Instructions Manual, Page: 27 / 89

Seat functions and operation
GB
27
Seat heater and seat ventilation
The seat ventilation system makes sure that
the seat surface remains dry. Humidity in the
contact area of the seat will be taken away.
This ensures a comfortable, cool and clean
seat feeling.
Operate this switch to activate or deactivate
the seat heater and the seat ventilation.
0 Seat heater and seat ventilation OFF
1 Seat heater ON (seat ventilation OFF)
2 Seat ventilation ON (seat heater OFF)
Lumbar support
With the upper and lower switch the curvature
in the upper and lower area of the backrest
upholstery can be individually adjusted.
This increases both the seating comfort and
the performance of the driver.
The lumbar support curvature can be
increased pressing "
+ " or reduced by pressing
" – " on the relevant switch.
When the backrest upholstery does no longer
react to pressing "+", the maximum curvature
has been reached and the switch should be
released.
Backrest adjustment
Pull up the locking lever to release the
backrest catch. When releasing the backrest
catch, do not apply load to the backrest by
pressing against it.
By exerting pressure on or off the front or rear
part of the seat pan it can be moved to the
desired position. Release the locking lever to
lock the backrest.
It should not be possible to move the
backrest into another position after it has been
locked.
* if fitted ** depending on model *** optional extra
+30°
- 10°
925
2
2
+ -
1
1
926
0
2
1
927