37
In the weighting format, it is numbered from #00001” value to #99999#.
To set it to zero, press
in weighing mode.
Important: Data output to print is compatible with PR-3 de GRAM. If you use
another type of printer, GRAM cannot guarantee its appropriate working.
Data output RS-232C for PC or POS
This scale has a data output compatible with RS-232C and can communicate
with devices that use different protocols. To configure it, follow the following
procedure:
When the balance is in weighing mode, press the
. The screen will
display the message “PLUPro”. Press the
several times, until the screen
shows “Uart”.
Press four times
until the display shows “Adr” followed by a numeric
value. Select the value corresponding to the desired protocol in accordance
with the following information:
Protocol 0 -
Without data output
Protocol 1 -
Continuous output for remote display RD3.
Protocol 2 -
Output on request ($)
Protocol 3 -
Continuous output (for PC or compatible)
By pressing the
and
, you can choose the desired option, and after
press
to confirm.
To exit, press the
and the balance will return to normal mode.
Summary of Contents for S3 SERIES
Page 130: ...130 Notes...
Page 131: ...131 Notes...
